NEO Synthetics CV 500 CV Grease

$47.99
(Exc. 8% Sales Tax - GA only)
JAR
GGTUBE
CGTUBE
Order today, dispatch in 3-5 days
+
Part Number
NEOCV500J
NEO Synthetics
Information

NEO CV 500 grease is a complex blend of mineral oils, synthetic esters and lubricating solids. NEO CV 500 should be used when temperature extremes are not a problem. (See special notes below.) Their designed use is for severe sliding contact such as extremely heavily loaded ways and guides, very slow, large diameter ball and roller bearings, bushings, linear and oscillating mechanisms and open gears.

Articulated, CV and Universal Joints subject to the hardest shock loading, angularity and radial forces such as found on All Terrain Vehicles. Can be used on sensitive metallurgy including copper, silver, tin and aluminum and their alloys. Exceptionally resistant to water wash conditions including emulsions. Special compounding and lubricating solids provide superior anti seize characteristics and exceptional acid resistance.

Special Note: NEO HPCC1 should be used when extreme high and low temperatures are encountered or sustained.
(Elevated temperatures indicate extra protection is needed)

Applications:

Vehicular uses of NEO CV 500 Grease are typically constant velocity couplings (CV joints) and industrial applications include linear reciprocating mechanisms, heavily loaded ways and guides, spline couplings subject to linear motion and heavy loads in either direction, press fit and assembly operations, jack screws, mechanical presses, and very slow large diameter ball and roller bearings.

Special Applications: Anti seize to 750°F. Assembly and spline Lubricant, Racing Cam Lubricant, Press Fitting Stainless Steel, Jack Screws, High Temperature Open Gear Lubricant, Mechanical Presses, Dipper Sticks and Fasteners. Pump and valve lubrication in corrosive environments. MoS2 (Moly) is recommended for all constant velocity joints except for double articulated spider types.

Available in jars, cartridges or tubes

Features:

  • NLGI Grade 2 1/2
  • Worked penetration at 60 strokes 250
  • Dropping point: 315°C
  • Base oil, ISO VG Grade 1000
  • Pour point: 5°C (41°F)
  • Flash point: 270°C (518°F)
  • Shell 4 Ball EP, weld load Kg does not weld at 800Kg
  • Load wear index 200
  • P65 Warning
     "WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.

          CLICK HERE FOR MORE INFORMATION